Loading ...
Loading ...
Loading ...
340 SAFETY
no top tether anchorage for that seating
position, move the child restraint to
another position in the vehicle if one is
available.
2. Route the tether strap to provide the most
direct path for the strap between the anchor
and the child seat. If your vehicle is
equipped with adjustable rear head
restraints, raise the head restraint, and
where possible, route the tether strap under
the head restraint and between the two
posts. If not possible, lower the head
restraint and pass the tether strap around
the outboard side of the head restraint.
Tether Strap Mounting (Two-Door Models)
Tether Strap Mounting (Four-Door Models With Center
Armrest)
3. Attach the tether strap hook of the child
restraint to the top tether anchorage as
shown in the diagram.
4. Remove slack in the tether strap according
to the child restraint manufacturer’s
instructions.
Center Tether Attachment — Four-Door
Without Center Armrest
1. If adjustable, lower the adjustable center
head restraint to the full down position.
2. Route the tether strap over the seatback
and head restraint.
Tether Strap Mounting (Four-Door Models Without
Center Armrest)
WARNING!
An incorrectly anchored tether strap could
lead to increased head motion and
possible injury to the child. Use only the
anchorage position directly behind the child
seat to secure a child restraint top tether
strap.
If your vehicle is equipped with a split rear
seat, make sure the tether strap does not
slip into the opening between the seat-
backs as you remove slack in the strap.
WARNING! (Continued)
(Continued)
21_JL_OM_EN_USC_t.book Page 340
Loading ...
Loading ...
Loading ...