User Manual - Page 29

For 2021 WRANGLER.

Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE 27
with the key fob’s wireless signal and prevent
the Passive Entry system from locking/
unlocking the vehicle.
Passive Entry Unlock initiates illuminated
approach (low beams, license plate lamp,
position lamps) for whichever time duration
is set between 0, 30, 60 or 90 seconds.
Passive Entry Unlock also initiates two
flashes of the turn signal lamps.
If wearing gloves, or if it has been raining/
snowing on the Passive Entry door handle,
the unlock sensitivity can be affected,
resulting in a slower response time.
If the vehicle is unlocked by Passive Entry
and no door is opened within 60 seconds, the
vehicle will re-lock and if equipped will arm
the Vehicle Security system.
To Unlock From The Driver or Passenger Side
With a valid Passive Entry key fob within 5 ft
(1.5 m) of the door handle, grab the handle to
unlock the vehicle. Grabbing the driver’s door
handle will unlock the driver door automatically.
Grabbing the passenger door handle will unlock
all doors and the swing gate automatically.
Grab The Door Handle To Unlock
NOTE:
If “1st Press Of Key Fob Unlock” is programmed
all doors will unlock when you grab hold of the
front driver’s door handle. You can select
between “Unlock Driver Door 1st Press” and
“Unlock All Doors 1st Press” within Uconnect
Settings Ú page 211.
Frequency Operated Button Integrated Key
(FOBIK-Safe)
To minimize the possibility of unintentionally
locking a Passive Entry key fob inside your
vehicle, the Passive Entry system is equipped
with an automatic door unlock feature which
will function only if the ignition switch is in the
OFF position.
FOBIK-Safe only executes in vehicles with a
START/STOP ignition. There are three situations
that trigger a FOBIK-Safe search in any passive
entry vehicle:
A lock request is made by a valid Passive
Entry key fob while a door is open.
A lock request is made by the Passive Entry
door handle while a door is open.
A lock request is made by the door panel
switch while the door is open.
When any of these situations occur, after all
open doors are shut, the FOBIK-Safe search will
be executed. If it finds a Passive Entry key fob
inside the vehicle, the vehicle will unlock and
alert the customer. If Passive Entry is disabled
using Uconnect system, the key protection
described in this section remains active/
functional.
NOTE:
The vehicle will only unlock the doors during a
FOBIK-Safe operation when a valid Passive
Entry key fob is detected inside the vehicle. The
vehicle will not unlock the doors when any of the
following conditions are true:
A second valid passive entry key fob is
detected outside of the vehicle (within 5 ft
(1.5 m) of a passive entry door handle).
2
21_JL_OM_EN_USC_t.book Page 27
Loading ...
Loading ...
Loading ...