Loading ...
Loading ...
Loading ...
5
PREFACE
CONTENTS
PRECAUTIONS
PRECAUTIONS
1. INSTALLATION
3
2
1
The AR-650/800 should be installed by a qualified service technician.
Note: The packing material should be disposed of properly.
To obtain the best possible results, this copier should be used in conjunction with a
dedicated AC power line at the following ratings:
115V–60 Hz, 16 A
Notes:
1. The use of other appliances or other equipment on the same line as this copier may adversely
affect performance and copy quality.
2. Be sure to use a 3-conductor, grounded wall outlet.
3. In areas where a 2-pin plug is used, the copier must be grounded for safety.
Never ground it to a gas pipe, a water pipe, or any other object not suitable for grounding.
After a suitable place has been selected for the installation of the AR-650/800, please
do not change it. Avoid excessive heat, dust, vibration and direct sunlight. Also,
provide proper ventilation as the copier emits a small amount of ozone.
Notes:
1. Recommended environmental range for use is as follows:
• Temperature: 10~30˚C/50~86˚F
• Humidity: 20~85% RH
2. To insure optimal operation, allow clearances of at least 32" on the left, 32" on the right
and 4" in the rear (refer to the illustration below).
The socket-outlet shall be installed near the equipment and shall be easily accessible.
4 inches
32 inches
32 inches
Loading ...
Loading ...
Loading ...