Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
86
The outlet must be easily accessible in
an emergency so that the wine condi-
tioning unit can be quickly discon-
nected from the electrical supply in
case of an emergency.
If the outlet is no longer accessible
once the appliance has been installed,
an all-pole disconnect device with a
contact opening of at least 1/8" (3mm)
must be present on site. The discon-
nect device may be circuit breaker, a
fuse, or a contactor (compliant with lo-
cal regulations).
The plug and power cord must not
come into contact with the back of the
appliance as vibrations can cause dam-
age to these components. This, in turn,
could result in a short circuit.
Do not plug in other devices behind this
wine conditioning unit.
Do not connect the wine conditioning
unit to an inverter such as those used
with an autonomous energy source e.g.
solar power. When switched on, peak
loads in the system can cause the
safety switch-off mechanism to be trig-
gered. This can damage the electronic
unit.
The wine conditioning unit must not be
used with so-called energy-saving de-
vices either. These reduce the amount
of energy supplied to the wine condi-
tioning unit, causing it to overheat.
If the power cord needs to be replaced,
this must be done by a qualified techni-
cian.
Loading ...
Loading ...
Loading ...