Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
80
Check that the wine conditioning unit
is standing securely in the building-in
niche and that the appliance door
closes properly.
Installing the custom door panel
If installed in a run of units, make sure
that the top edge of the custom door
panel is at the same height as adjoin-
ing unit doors.
The door panel must be installed level,
and not under tension.
Please use the screws for the custom
door panel as well as the gap cover
included in the accessories supplied.
Open the appliance door.
Remove the covers from the top
and bottom of the appliance door.
Measure the distance X between the
top edge of the housing unit wall
above and the middle of the vertical
slots in the mounting frame.
Place the custom door panel on a
firm surface, with the external side
facing downwards (place on a blanket
or similar to avoid it becoming
scratched).
X
Y
Mark the distance X on the inner side
of the custom door panel.
Similarly, locate and mark the vertical
midpoint Y on the custom door panel.
Loading ...
Loading ...
Loading ...