Loading ...
Loading ...
Loading ...
Optimum temperature and air quality
29
Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the ex-
ternal temperature should drop below
this level, a heater element turns on au-
tomatically to keep the temperature in-
side as constant as possible. If the am-
bient temperature continues to fall, the
appliance switches itself off automati-
cally.
Isolation plate for thermal separation
The wine unit comes with a fixed isola-
tion plate that divides the interior of the
unit into two separate temperature
zones. This allows you to store different
types of wine at the same time, e.g., red
wine and Champagne.
The isolation strips inside the glass
door prevent the exchange of heat be-
tween the individual zones.
Setting the temperature
The temperatures in the wine condition-
ing zones can be set independently of
one another.
Touch the sensor for the zone for
which you wish to change the tem-
perature so that it is highlighted in
yellow.
The current temperature for the se-
lected zone appears in the display.
Use the two sensors underneath the
display to set the temperature.
By touching the sensor:
– The temperature decreases.
– The temperature increases.
Touch the OK sensor to confirm your
selection
or
Wait approximately 5 seconds after
the last touch of a sensor.
The temperature being set will flash in
the display.
Loading ...
Loading ...
Loading ...