Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
60
Installation location
Risk of injury and damage.
A wine conditioning unit that has not
been installed properly can tip up.
Keep the appliance door shut until
the wine conditioning unit has been
built in and secured in its building-in
niche in accordance with these oper-
ating and installation instructions.
Fire hazard and risk of damage.
This wine conditioning unit must not
be installed underneath a cooktop.
Fire hazard and risk of damage.
Do not install a warming drawer un-
der the wine conditioning unit.
Risk of damage.
Do not install a vacuum sealing
drawer under the wine conditioning
unit.
Risk of tipping over.
Risk of injury and damage.
If you install the wine conditioning
unit by itself in a separate housing
unit, this housing unit must be se-
curely fixed to the wall.
This appliance should be installed in a
dry, well-ventilated room.
When deciding where to install your
wine conditioning unit, please bear in
mind that it will use more energy if in-
stalled near to a heater, a range, or an-
other appliance that gives off heat. Di-
rect sunlight should also be avoided.
The higher the room temperature, the
longer the compressor has to run and
the higher the energy consumption is.
When installing the wine conditioning
unit, please note:
– The electrical socket must be easily
accessible in an emergency and not
concealed behind the appliance.
– The plug and power cord must not
touch the back of the wine condition-
ing unit as they could be damaged by
vibrations from the appliance.
– Do not plug in other appliances be-
hind the wine conditioning unit.
Loading ...
Loading ...
Loading ...