Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
76
Fit the stopper supplied onto the
fixing bracket also supplied.
Screw the supplied fixing bracket
loosely with the screws supplied
into the bottom of the appliance. Do
not tighten the screws so that you
can adjust the position of this part.
Push the wine conditioning unit two
thirds of the way into the building-in
niche.
Carefully remove the protective foil
from the supplied sealing strip.
Stick the sealing strip onto the
side of the appliance on which the
door will open, flush with the front.
1. Position the sealing strip flush with
the lower edge of the top fixing
bracket.
2. Stick it down along its entire length.
If necessary, insert the locking pins
supplied for limiting the door opening
into the hinges from above (see “Ad-
justing the hinges”).
Loading ...
Loading ...
Loading ...