Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
72
The door hinges on the wine condition-
ing unit are set at the factory to enable
the appliance door to be opened wide.
However, if the opening angle of the ap-
pliance door needs to be limited for any
reason, the hinge can be adjusted to
accommodate this.
If, for example, the appliance door hits
an adjacent wall when it is opened, you
should limit the opening angle of the
appliance door to 90°.
The locking pins for limiting the door
opening must be fitted before the ap-
pliance is installed.
Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The appliance door opening angle is
now limited to approx. 90°.
Installing the wine conditioning
unit
Risk of damage and injury from
the wine conditioning unit tipping
over.
There is an increased risk of injury
and damage if the wine conditioning
unit is installed by a single person.
Two people are required for installing
the wine conditioning unit.
Install the wine conditioning unit in a
stable, solid housing unit, positioned
on an even and level floor.
The building-in niche must be hori-
zontally and vertically aligned.
The required ventilation gaps must be
provided (see “Ventilation” and “In-
stallation dimensions” under “Installa-
tion”).
The following parts are supplied with
the wine conditioning unit:
All installation parts are number coded.
This coding is also used in the installa-
tion instructions.
– Required for installing the wine con-
ditioning unit in its niche:
Loading ...
Loading ...
Loading ...