Loading ...
Loading ...
Loading ...
When selecting 30p or 60p
00:00:00:00 - 23:59:59:29
When selecting 25p or 50p
00:00:00:00 - 23:59:59:24
When selecting 24p, you can set the last 2 time code digits of the frames in multiples of 4,
between 0 and 23.
RESET: Initializes the time code.
Press the ENTER button to display [SURE?] while [OK] is displayed, then press the
ENTER button again.
FORMT: Selects the time code recording method.
DF: Records the time code in drop frame.
NDF: Records the time code in non-drop frame.
In the following situations, the time code is fixed to [NDF].
When [VMODE] is set to 24p
When [V.SYS] is set to [PAL]
RUN: Sets how the time code advances.
REC: The time code advances only while recording XAVC S movies. It is recorded
sequentially from the time code on the image recorded last time.
FREE: The time code advances sequentially, regardless of the operation of the camera.
MAKE: Sets the time code to be recorded.
PrSet: The newly set-up time code is recorded on recording media.
REGEN: The last time code of the previous recording is read out from the recording
media and the new time code is recorded sequentially from the last time code.
Loading ...
Loading ...
Loading ...