Loading ...
Loading ...
Loading ...
embedded sand, etc. Replace the waterproof packing if you find any of these.
Inspect the waterproof packing contact surface on the case body in the same way.
[15] How to use
Getting Started Using the Waterproof Case
How to check for water leaks
Before installing the camera, always close the waterproof case and immerse it in water to
make sure no water leaks in.
When finding a malfunction of waterproof case
If a malfunction is found by inspection of the waterproof packing or check for water leaks,
stop using this unit immediately and take it to the nearest Sony dealer.
[16] How to use Getting Started Using the Waterproof Case
Maintenance
After recording in a location with a sea breeze, wash this unit thoroughly in fresh water
with the buckle fastened to remove salt and sand, then wipe with a soft dry cloth. It is
recommended that you submerge the waterproof case in fresh water for about 30
minutes. If it is left with salt on it, metal portions may be damaged or rust may form and
cause water leakage.
If sun oil is on the waterproof case, be sure to wash it off thoroughly using lukewarm
water.
Wipe the inside of the waterproof case with a soft dry cloth. Do not wash it with water.
Be sure to perform the above maintenance each time you use the waterproof case. Do not
use any type of solvent such as alcohol, benzine or thinner for cleaning, as this might
damage the surface finish of the waterproof case.
When storing the waterproof case
To prevent deterioration of the waterproof packing, store the waterproof case in a cool,
well-ventilated location. Do not fasten the buckle.
Prevent dust from collecting on the waterproof packing.
Avoid storing the waterproof case in a cold, very hot or humid place, or together with
naphthalene or camphor, as these conditions might damage the waterproof case.
Loading ...
Loading ...
Loading ...