Loading ...
Loading ...
Loading ...
42
www.insigniaproducts.com
Load is too wet at
the end of the
cycle
• Use a high-efficiency detergent to reduce over-sudsing. See
Step 1: Selecting a detergent on page 32.
• The load may be too small. Very small loads (one or two items)
may become unbalanced and not spin out completely.
Water leaks • Make sure that all hose connections are tight. See Step 2:
Connect the water hoses on page 21
and Step 3: Connect the drain hose on page 25.
• Make sure that the end of the drain hose is correctly inserted
and secured to the drainage system. See Step 3: Connect the
drain hose on page 25.
• Avoid overloading.
• Use a high-efficiency detergent to reduce over-sudsing. See
Step 1: Selecting a detergent on page 32.
Load has too
many suds
• Use a high-efficiency detergent to reduce over-sudsing. See
Step 1: Selecting a detergent
on page 32.
• If you have “soft” water, reduce the amount of detergent.
• For small or lightly soiled loads, reduce the amount of
detergent.
Washer has an
odor
• Periodically run a Tub Clean cycle to clean the tub. See
Cleaning the tub
on page 39.
• Use a high-efficiency detergent to reduce over-sudsing.
Excessive suds collect in nooks and crannies and cause odor.
See Step 1: Selecting a detergent on page 32.
• Dry the interior of your washer after the total cycle has
finished.
PROBLEM SOLUTION
Loading ...
Loading ...
Loading ...