Loading ...
Loading ...
Loading ...
OPERATING INSTRUCTIONS
24
www.insigniaproducts.com
4 Connect the ends of the water supply hoses to the water supply intake
connections at the top of your washer. Make sure that the rubber washers are
in place. The water supply hose connected to the hot faucet must be
connected to the hot water supply intake and the water hose connected to
the cold faucet must be connected to the cold water supply intake.
5 Tighten the fittings by hand until they are snug, then tighten them an
additional two-thirds of a turn with pliers or a wrench.
6 Turn on the hot and cold water supplies, then check all the water supply
intake connections and the faucets for water leaks.
Notes:
• If you don’t want to use the hot water supply hose, insert a water intake cap into
the hot water supply intake hole. In this case, you must select the Tap Cold option
for the water temperature.
• An intake cap isn’t provided with your washer. You must purchase it separately.
CAUTIONS:
• Don’t overtighten the fittings or apply tape or sealant to the faucets or water
supply intakes. This can damage the fittings.
• Make sure that the water supply hoses aren’t twisted or bent. A bent or twisted
hose can leak and cause an electric shock because of water leakage. To ensure the
correct water usage, connect both hot and cold water faucets. If either or both
aren’t connected, an error code could occur.
Loading ...
Loading ...
Loading ...