Loading ...
Loading ...
Loading ...
104
b Using a commercially available brush, clean off
cuttings, lint and dust.
Specifically, clean the surface of the blade and the
cutting scraps or shavings in the spaces. If lint and dust
accumulate between the blade and holder, the blade
may no longer rotate or the cutting quality may
become poor. In addition, clean out any lint and dust
that has accumulated in the cap.
Note
• Clean so as to avoid bumping the blade edge
against anything hard, such as metal.
CAUTION
• Do not touch the tip of the blade with your
hands or fingers. There is a risk of injury.
c Attach the holder cap to the holder.
For details on attaching the holder cap, see “Installing”
on page 102.
■ Cleaning Inside the Machine
If there are vertical lines or blank areas in the scanned
image, lint or dust may have accumulated in the
machine. The lint may also attach to the surface of the
feed rollers, preventing a mat to be loaded or unloaded
correctly. Use a soft brush to clean it.
a Turn off the machine, unplug the power cord
from the electrical outlet, and then disconnect
the AC power cord from the AC power jack on
the back of the machine.
b Open the front tray cover.
c Remove the holder from the carriage.
d Use a commercially available brush to clean
around the feed slot and the carriage.
Loading ...
Loading ...
Loading ...