Loading ...
Loading ...
Loading ...
102
c Pull up the holder to leave the blade in the
rubber area.
c(For Rotary Auto Blade Holder) Hold the shaft
section of the rotary auto blade, and remove it
from the holder.
CAUTION
• When removing the rotary auto blade, do not
touch the blade. Be sure to hold the shaft while
removing it. There is a risk of injury.
■ Installing
a Grasp the shaft of the new blade, and then
insert it into the blade slot in the end of the
holder.
The blade shaft is held in place by a magnet in the
holder. Slowly insert the blade shaft, and then slowly
release it after the shaft snaps into place against the
magnet.
b Twist on the holder cap to attach it to the
holder.
Fully tighten the cap until it can no longer be turned.
Note
• When attaching the holder cap, be careful not
to bump the blade edge against the holder cap.
• Please remove protective cap from blade
holder before placing it into the machine
carriage.
WARNING
• This is not a toy and is not intended to be used
by children. In order to prevent choking
hazards, do not allow infants/children to put the
protective cap in their mouths.
CAUTION
• After removing the blade holder from the
machine, be sure to attach the protective cap.
• Do not press the tip of the holder with your
hand or fingers because the tip of the blade will
extend and may result in injuries.
• Do not touch the tip of the blade with your
hands or fingers. There is a risk of injury.
• This is not a toy and is not intended to be used
by children. In order to prevent injury, do not
allow infants/children to touch the blade.
Loading ...
Loading ...
Loading ...