V65EP User Manual

Loading ...

4 Value Series Manual

A licensed professional must install the appliance,

inspect it, and leak test it before use. The warranty

will be voided due to improper installaon.

The installer should have skills such as:

 gas sizing

 connecng gas lines, water lines, valves,

electricity,

 knowledge of applicable naonal, state, and

local codes.

 installing venng through a wall or roof

 training in installaon of tankless water heaters.

(Training can be accessed online at

www.trainingevents.rinnai.us)

Installaon Instrucons (for the licensed professional)

Installaon Steps

Prepare for Installaon ...................................... 5

Determine Installaon Locaon ......................... 6

Checklist to Determine Installaon Locaon ... 12

Mount to Wall .................................................. 12

Remove the Front Panel .................................. 12

Installaon of Venng (indoor models only) ... 13

Condensate (indoor models only) .................... 15

Checklist for Venng and Condensate

(indoor models only) ........................................ 15

Installaon of Plumbing ................................... 16

Checklist for Plumbing ..................................... 18

Installaon of Gas Supply ................................. 18

Connect Electricity ........................................... 20

Adjust for High Altude ................................... 20

Adjust for Vent Length (indoor models only) .. 20

Checklist for Gas and Electricity ....................... 20

Installaon of Temperature Controller ............ 21

Final Checklist................................................... 23

General Instrucons Installer Qualicaons

DO NOT

 Do not install the V94i, V94Xi, V75i, or the V65i

outdoors.

 Do not install the V94e, V75e, or the V65e indoors.

 Do not install the appliance in an area where water

leakage of the unit or connecons will result in

damage to the area adjacent to the appliance or to

lower oors of the structure. When such locaons

cannot be avoided, it is recommended that a

suitable drain pan, adequately drained, be installed

under the appliance. The pan must not restrict

combuson air ow.

 Do not obstruct the ow of combuson and

venlaon air. Combuson air shall not be

supplied from occupied spaces.

 Do not use this appliance in an applicaon such as

a pool or spa heater that uses chemically treated

water . (This appliance is suitable for lling large or

whirlpool spa tubs with potable water.)

 Do not use substute parts that are not authorized

for this appliance.

MUST DO

 The installaon must conform with local codes or,

in the absence of local codes, with the Naonal

Fuel Gas Code, ANSI Z223.1/NFPA 54, or the

Natural Gas and Propane Installaon Code, CSA

B149.1. If installed in a manufactured home, the

installaon must conform with the Manufactured

Home Construcon and Safety Standard, Title 24

CFR, Part 3280 and/or CAN/SCA Z240 MH Series,

Mobile Homes.

 The appliance, when installed, must be electrically

grounded in accordance with local codes or, in the

absence of local codes, with the Naonal Electrical

Code, ANSI/NFPA 70, or the Canadian Electrical

Code, CSA C22.1.

 The appliance and its appliance main gas valve

must be disconnected from the gas supply piping

system during any pressure tesng of that system

at test pressures in excess of 1/2 psi (3.5 kPa)

(13.84 in W.C.).

Type of installaon

 For installaon in residenal applicaons.

 Cered for installaon in manufactured (mobile)

homes.

Loading ...

User Manual - Page 4