Loading ...
Loading ...
Loading ...
Transporting children safely
Fitting a child seat using the seat belt
Fig. 36 On the rear seats: installing the child
seat.
If you want to fit a universal approval catego-
ry (U) chil
d seat in your vehicle, you must
check that the seat is approved for your vehi-
cle. You will find any necessary information
on the child seat’s orange ECE approval la-
bel. The following table shows the different
fitting options.
Weight group
Front passenger seat
a)
Rear side seat Rear central seat
b)
Airbag enabled airbag disabled
c)
Group 0 to 10 kg X U U U
Group 0+ to 13 kg X U U U
Group I 9 to 18 kg X U U U
Group II 15 to 25 kg X UF UF UF
Group III 22 to 36 kg X UF UF UF
X: Not compatible for the installation of seats install chairs in this configuration.
U: Suit
able for universal restraint systems for use in this weight group.
UF: Acceptable for front-facing universal-category child restraint systems approved for this mass group.
a)
Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats.
b)
For semi-universal chairs where the securing system is the car safety belt and the support bracket, do not use them in the centre rear seat.
c)
Seats without height adjustment shoul
d be placed in their rearmost position. Seats with height adjustment should be placed in their rearmost and highest position.
»
41
Loading ...
Loading ...
Loading ...