Loading ...
Loading ...
Loading ...
Driving
Parking lock manual release mechanism
If
, in the event of a power failure (e.g. the 12-
volt vehicle battery is drained), the vehicle
must be towed and the parking lock can be
released manually. In this case, you should
seek professional assistance.
Kick-down
The kick-down device provides maximum ac-
celeration when the gear selector lever is in
the positions D, S or in Tiptronic mode.
When the accelerator pedal is pressed right
down, the automatic gearbox will shift down
to a lower gear, depending on road speed
and engine speed. This takes advantage of
the maximum acceleration of the vehicle
›››
.
The upshift t
o the next higher gear is delayed
until the engine reaches maximum rpm.
WARNING
Observe the safety warnings
›
››
in Selec-
t
or lever positions on page 228.
●
Never allow the brake to rub and do not
use the brake pedal too often or for long
periods, as the brakes can overheat. This
reduces the braking power, increases the
braking distance or even causes a brake
system fault.
●
If you have to stop on a hill, keep the vehi-
cle’s brakes applied with the brake pedal or
parking brake.
WARNING
Please note that if the road surface is slip-
pery or w
et, the kick-down feature could
cause the driving wheels to spin, which
could result in skidding.
CAUTION
●
If you st
op the vehicle on a gradient, do
not attempt to stop it from rolling by de-
pressing the accelerator when a gear has
been selected. This could cause overheat-
ing and damage the automatic gearbox.
●
If you allow the vehicle to roll with the
lever in position N and the engine off, the
automatic gearbox will be damaged due to
a lack of lubrication.
●
In certain driving situations or traffic con-
ditions, the gears could overheat and be
damaged! If the warning lamp lights up,
stop the vehicle as soon as you can and
wait for the gearbox to cool
›››
page 232.
●
If the gearbox operates with the backup
programme, take the vehicle to a special-
ised workshop and have the fault repaired
without delay.
Launch-control program
The Launch-control programme enables
maximum accel
eration from a standstill.
Condition: the engine must have reached op-
erating temperature and the steering wheel
must not be turned.
The engine speed for Launch-control is differ-
ent on petrol and diesel engines.
To use the Launch-control you must discon-
nect the traction control (TCS) or activate the
ESC Sport mode, using the Infotainment sys-
tem menu: press the function button > As-
sistants > ESC menu. The warning lamp
will remain on.
●
Press the brake pedal with your left foot
and hold it down for at least one second.
●
Set the selector lever to position S or Tip-
tronic, or select the sport driving profile from
the SEAT Drive Profile
›››
page 234.
●
With your right foot, press the accelerator
down to the full throttle or kick-down position.
The engine speed will stabilise at about
3,200 rpm (petrol engine) or about
2,000 rpm (diesel engine).
●
Take your left foot off the brake pedal. The
vehicle starts with maximum acceleration.
WARNING
●
Al
ways adapt your driving style to the
traffic conditions.
●
Only use the Launch control programme
when road and traffic conditions permit,
and make sure your manner of driving and
accelerating the vehicle does not
230
Loading ...
Loading ...
Loading ...