Loading ...
Loading ...
Loading ...
Air conditioning
For safety reasons, the air recirculation is dis-
connect
ed when is pressed.
Switching the manual air recirculation
mode on and off
●
Press the button to connect or discon-
nect manual air recirculation.
Climatronic automatic air recirculation
mode (only for versions with 3 zone Clima-
tronic)
With the automatic air recirculation mode ac-
tivated, the entry of fresh air into the cabin in-
terior is enabled. If the system detects a high
concentration of hazardous substances in the
ambient air, air recirculation mode is switched
on automatically. When the level of impurities
drops to within a normal range, recirculation
mode is switched off.
The system is unable to detect unpleasant
smells.
●
Automatic air recirculation is activated and
deactivated in the air conditioning settings
menu. An A will be displayed next to the recir-
culation icon on the Climabar, indicating
that the function is active
›››
page 157
Front seat heating
With the engine on, the front seat cushion and
backr
est can be heated electrically.
Control seat heating
Press the icon on the Climabar
›››
Fig. 150
A
to view the seat heating menu.
●
Press the left or right seat icon to connect
the seat heating t
o maximum power.
●
Press the left or right seat icon repeatedly
until the desired level is adjusted.
●
To switch off seat heating, press the corre-
sponding seat icon several times until no LED
is on.
●
You can also adjust the seat heating level
by using two fingers to press the sensor field
›››
Fig. 150
1
or
2
(left or right seat).
If the ignition is s
witched on again in approx.
the next 10 minutes, the driver seat heating is
automatically turned on to the level set the
last time.
Smart Heated Seats
This is an smart function that automatically
activates and regulates the driver and front
passenger seat heating for greater comfort.
To access the Smart Heated Seats function,
the SEAT CONNECT personalisation service
must first be activated
›››
page 182.
The Smart Heated Seats function requires a
period for learning usage habits. The start of
the learning process is shown on the infotain-
ment display. Its evolution (learning) will also
be shown during this process, until it is com-
plete (AUTO).
Once the learning period is over, the heated
seats are turned on and their temperature
level adjusted automatically.
If you are not satisfied with the temperature
level provided by the system during automat-
ic regulation, adjust the seat heating manual-
ly and the function will be optimised (Opti-
mising). The optimisation process will be dis-
played in the seats submenu of the infotain-
ment display.
To reset the process and start the learning
period, go to the submenu Settings > Reset
driver / front passenger profile.
Cases in which the heat seating should
not be switched on
Do not switch the seat heating on if any of the
following conditions are met:
●
The seat is not occupied.
●
The seat has a cover.
●
A child seat has been installed on the seat.
●
The seat cushion is wet or damp.
●
The outdoor or indoor temperature is great-
er than +25°C (77°F).
WARNING
People who cannot perceive pain or tem-
per
ature because of medications, paralysis
»
161
Loading ...
Loading ...
Loading ...