Loading ...
Loading ...
Loading ...
Operation
●
Pr
ess the immediate on/off button in the
mobile App or on the MySEAT website.
●
Press the immediate on icon in the Info-
tainment system (while the vehicle is switch-
ed off). During immediate air conditioning, the
vehicle reaches the set temperature in a
maximum of 30 minutes.
●
Automatically programming a departure
time in the mobile App, on the My SEAT web-
site, or in the Battery Manager menu of the
Infotainment system
›››
page 168.
Switching off the stationary air condition-
ing
In can be switched off in the following ways:
●
Press the immediate on/off button in the
mobile App or on the MySEAT website.
●
Press the immediate on/off icon in the in-
fotainment system (while the vehicle is
switched off). It is only possible to switch it off
if the stationary air conditioning was switched
on using this button.
●
Press the air conditioning off button in the
air conditioning menu of the infotainment sys-
tem (while the vehicle is off).
●
Automatically, a few minutes after the
scheduled departure time.
●
Automatically if the charge level of the ve-
hicle's high-voltage battery drops excessive-
ly.
If the stationary air conditioning is active
when starting to drive, it will remain active for
the established time if not manually discon-
nected.
Note
●
Oper
ating noises are heard while the sta-
tionary air conditioning is connected.
●
When the outside humidity is high and the
inside temperature low, condensation from
the air conditioning system may evaporate
when the stationary air conditioning is run-
ning. In this case, steam may be released
from underneath the vehicle. This does not
mean that there is a vehicle malfunction.
Setting the stationary air condi-
tioning
3 V
alid for: hybrid vehicles.
The stationary air conditioning can be set in
the Infotainment system for the scheduled
departure time. You can set the desired tem-
perature of the inside of the vehicle for the
vehicle’s planned departure time.
Based on the desired temperature, the vehi-
cle calculates the time that the stationary air
conditioning needs to be switched on to
reach the desired temperature at the depar-
ture time.
Vehicle air conditioning prior to departure
●
Open the Batt
ery Manager menu.
●
Set the scheduled departure time.
●
Turn on the air conditioning and charging
functions as needed.
If the two air conditioning and charging
functions are on at the same time, the high-
voltage battery is charged first and then the
vehicle is air conditioned. The departure time
can only be enabled when one of the two
functions has been enabled.
If the charging connector is plugged in, the
vehicle starts cooling down around 30 mi-
nutes before the scheduled departure time. If
the vehicle is not ready to drive at the sched-
uled departure time, it will be cooled for a fur-
ther 15 minutes.
If the charging connector is not plugged in,
the air conditioning operating time is reduced
to 10 minutes. The operating time is extended
by 5 minutes if the vehicle is not ready to
drive.
The stationary air conditioning switches off
automatically.
Extended stationary air conditioning
In the Battery Manager menu can be found
an option to add extended air conditioning.
This means if the vehicle is air conditioned
(either by being switched on immediately or
due to departure scheduling), the
168
Loading ...
Loading ...
Loading ...