Loading ...
Loading ...
Loading ...
Driving
disconnection mode, the engine is not only
disconnect
ed but also turns off.
The indications and will be displayed on
the instrument cluster, the selected gear will
disappear, the RPM of the combustion engine
will drop to 0 and the text “coasting” will ap-
pear under current consumption.
Stopping inertia mode
●
Press the brake or the accelerator pedal.
To take advantage of the engine's inertia
mode, simply remove your foot from the ac-
celerator.
If the vehicle has SEAT Drive Profile
›››
page 234, the inertia mode can be activa-
ted in Normal, Eco and Individual modes. In
Eco mode, it is activated whenever the oper-
ating conditions are met, regardless of the
smoothness with which the foot is removed
from the accelerator.
WARNING
●
If the iner
tia mode has been switched on,
take into account, when approaching an
obstacle, that the vehicle will not deceler-
ate in the usual manner: risk of accident!
●
When using inertia mode while travelling
down hills, the vehicle can increase speed:
risk of accident!
●
If other users drive your vehicle, warn
them about inertia mode.
Note
●
The oper
ation of the inertia mode in com-
bination with hybrid engines (MHEV and
PHEV) can cause the combustion engine to
switch off.
●
The inertia mode will be automatically
disconnected on gradients steeper than
15%.
Indications on the instrument panel
displ
ay
Clutch
Clutch overheating! Please stop!
●
The clutch has overheated and could be
damaged. St
op and wait for the gearbox to
cool with the engine idling and press the P
parking lock button. When the warning lamp
and the driver message turn off, go to a spe-
cialised workshop to get the fault repaired. If
they do not turn off, do not continue driving.
Seek specialist assistance.
Faults in the gearbox
Gearbox: Fault! Stop the vehicle
and place the lever in the position
P.
●
There is a fault in the gearbox. Stop the ve-
hicle in a safe place and do not continue driv-
ing. Seek specialist assistance.
Gearbox: System fault! You may
continue driving.
●
Have the fault corrected by a specialised
workshop without delay.
Gearbox: System fault! You can
continue driving with restrictions.
Reverse gear disabled
●
Take the vehicle to a specialised workshop
and have the fault repaired.
Gearbox: System fault! You can
continue driving in D until switch-
ing off the engine
●
Park the vehicle in a safe place. Seek spe-
cialist assistance.
Gearbox: too hot. Adapt your
driving accordingly
●
Continue driving at moderate speeds.
When the warning lamp switches off, you can
continue driving in a normal manner.
Gearbox: press the brake and en-
gage a gear again.
●
If the warning was caused by the tempera-
ture of the gearbox, this driver message will
be displayed when the gearbox has cooled
again.
232
Loading ...
Loading ...
Loading ...