Loading ...
Loading ...
Loading ...
Start and driving
socket to charge the high-voltage bat-
t
ery, whenever possible
›››
page 308 .
The high-voltage battery charge level is
kept at around the current level while
driving. If you accelerate harder or in-
crease the vehicle speed, the combus-
tion engine starts up. When permitted by
the driver’s demand for acceleration and
the vehicle speed, the vehicle switches
back to electric mode.
Pressing this symbol selects a lower the-
oretical charge level. The vehicle only
uses the battery's charge when it is
above the selected theoretical charge
level. The rest is kept until the end of the
journey.
The Intelligent Hybrid App allows the user to
save electrical energy until reaching home
(charging point) with just “one click”. If this
option is not selected, the maximum amount
of electrical energy will be consumed until
the selected destination is reached. If the
user has no active route, the function will offer
the activation of a predictive route and BMA
mode from the widget itself with just one
click.
Show the active operating mode
The operating mode active at any given time
is displayed on the instrument cluster display,
e.g. .
=
WARNING
Switching to a different operating mode
whil
e driving can distract you from traffic
conditions and cause accidents.
Note
Information about the operating mode that
is curr
ently active is displayed on the in-
strument cluster display, along with the
charge level of the high-voltage battery.
Troubleshooting
The E-MODE oper
ating mode is not
available
The indicator lamp lights up in white.
The E-MODE operating mode
(driving in
electric mode) cannot be used temporarily
because one or more conditions are not met.
●
The conditions must be met to use the E-
MODE oper
ating mode
›››
page 222.
Start-Stop system
Control lamps
It lights up
The Start-Stop system is available, the automatic en-
gine shutdown is active.
It lights up
The Start-Stop system is not available or has been
disconnect
ed.
Instructions for the driver on the instru-
ment panel displ
ay
Start-Stop system deactivated. Start
the engine manually
●
This indication for the driver shows that the
Start-Stop system cannot start the engine
again.
Start-Stop system: Fault! Function
not available
●
There is a fault in the Start-Stop system.
Take the vehicle to a workshop to have the
fault repaired.
Description and operation
The Start-Stop system helps you to save fuel
and r
educe CO
2
emissions.
»
223
Loading ...
Loading ...
Loading ...