Loading ...
Loading ...
Loading ...
6
PRE-INSTALL NETWORKWIRING ACCESS CONTROLINTRODUCTION INSTALL
Specifi cations
CAP2D Capacity Resident Capacity: 25,000 / Local Event History: 6,000
CAP2D Operating Temperature Range -31°F to 150°F (-35°C to 66°C)
CAP2D Operational Humidity 5% to 95% non-condensing
Storage and Shipping Temperature Range -40°F to <185°F (-40°C To <85°C)
Wiegand Inputs (2) *26-Bit SIA Standard, 30-Bit Sentex, 32-Bit Mifare, 37-Bit HID with Facility Code,
37-Bit Transcore. Also supports ASCII for Wiegand keypads.
2 Primary and 2 Auxiliary Relay Outputs SPDT
Accessory Compatibility Refer to the accessory page for compatible accessories
Network Compatibility 10/100 Ethernet
Wire Specifi cation RJ-45 Wired Ethernet
PoE Supply Connector Confi guration Alternative B
Electrical Ratings
POWER IN VOLTAGE POWER (MIN)
Auxiliary Input 12 VDC 13 Watts
Power Over Ethernet 44-57 VDC 13 Watts
POWER OUT VOLTAGE CURRENT (MAX)
Relays (wet) 12 VDC 750mA (combined)
Wiegand Readers 12 VDC 750mA (combined)
Relays (dry-inductive) 30 VDC (max) 2,000mA
NOTE: IP Door Controller is to be connected to UL Listed
Commercial 294 or 603 Power Supply for Auxiliary, or UL Listed
294/294b PoE Listed power supply for Power over Ethernet.
*NOTE: Only 26-bit is UL compatible.
Loading ...
Loading ...
Loading ...