Loading ...
Loading ...
Loading ...
EN
16
OTHER FEATURES
Control lock
The Control Lock prevents unwanted drawer operation to
protect small children for example. The Drawer Microwave
can be set so that the control panel and the automatic door
mechanism are deactivated or locked.
To Lock
Touch STOP/CLEAR pad and hold for 3 seconds. The
display shows: LOCK ON.
To Unlock
Touch STOP/CLEAR pad and hold for 3 seconds. The
display shows: LOCK OFF.
The Control Lock is canceled when the electrical power
supply to your oven is interrupted. Set the Control Lock
again when power to the oven is restored.
Help
Each setting of POPCORN, REHEAT, COOK, DEFROST
and BEVERAGE has a cooking hint. If you wish to check,
touch TIMER/SETTINGS whenever HELP is illuminated in the
Interactive Display for these and other manual operation
hints.
+30 Sec
+30 SEC allows you to cook for 30 seconds at 100% by
simply touching the +30 SEC pad. You can also extend
cooking time in multiples of 30 seconds by repeatedly
touching the +30 SEC pad during manual cooking.
NOTE:
• To use +30 SEC, touch icon within 3 minutes after
cooking, closing the drawer or touching the STOP/CLEAR
pad.
• +30 SEC cannot be used with SENSOR SETTINGS,
REHEAT or DEFROST.
More or Less Time Adjustment
Should you discover that you desire any of the REHEAT or
DEFROST settings slightly more done, touch the POWER
LEVEL pad once after touching your selection. The display
will show: MORE.
For slightly less done, touch the POWER LEVEL pad twice
after touching your selection. The display will show: LESS.
Easy Wave Open Blue LED Indicator
Blue LED Off
• Factory default
• Control Lock
• User selects OFF
• Drawer is at full open position
Blue LED On
• Easy Wave Open is active
• On when fully closed
• On when cooking
Blue LED Flashing
• Drawer is opening - flashing 0.5 seconds off, 0.5
seconds on.
Multiple Sequence Cooking
Your Drawer Microwave can be programmed for up to 4
automatic cooking sequences, switching from one power
level setting to another automatically.
Sometimes cooking directions tell you to start on one power
level and then change to a different power level. Your
Drawer Microwave can do this automatically.
1. First enter cooking time. Then touch POWER LEVEL pad
once for 100% cooking or repeat touching POWER LEVEL
pad for a lower power level.
2. Enter second cooking time. Repeat touching POWER
LEVEL pad for desired level. You can follow this procedure
up to 4 times.
3. Touch START/+30 SEC pad.
NOTE:
• If POWER LEVEL pad is touched once, HIGH will be
displayed.
• If 100% is selected as the final sequence, it is not
necessary to touch the POWER LEVEL pad.
• If you wish to know power level during cooking, simply
touch the POWER LEVEL pad. As long as your finger is
touching the POWER LEVEL pad, the power level will be
displayed.
6 - OTHER FEATURES
Loading ...
Loading ...
Loading ...