Loading ...
Loading ...
Loading ...
5
N
0
526 / N
0
523 DUAL-MONAURAL PREAMPLIFIER / OWNER’S MANUAL
ENGLISH
GETTING STARTED
FRONTPANEL OVERVIEW:
N
0
526 AND N
0
523
GETTING STARTED
Front-panel controls/indicators
Input knob:
Rotate this knob to select the desired input to send
to the outputs. The name and volume level of the selected input
are indicated on the display. (Note: the Input knob will bypass
any input for which the Input Name Setup menu parameter has
been set to “Unused.”)
IR receiver:
the IR receiver receives commands from the
included remote control when the unit is not being controlled
via its rear-panel IR Input connector (see Rear-Panel Overview
for more information). Infrared communication requires line-
of-sight between the remote and this “target” on the unit’s front
panel.
Headphone output connector:
this ¼-inch (6.3mm) TRS phone
plug connector provides a stereo signal that can directly drive
most headphones. When the unit detects that headphones have
been connected, the Balanced and Single-Ended outputs are
automatically muted, and the Volume knob switches to control
of the Headphone output level. When the unit detects the
headphones have been disconnected, the Balanced and Single-
Ended outputs are automatically unmuted, and the Volume
knob returns to control of their level.
The balanced and single-ended outputs can be configured in
the Setup menu as Fixed (for use with recording components
or a second audio zone). When outputs are configured as Fixed,
they are not affected by any of the front-panel controls.
headphones
polarity
setup
enter
display intensity
balance mute
volumeinput
Standby
Button
Headphone
Output
Connector
Volume
Knob
Mute Button Display
Intensity
Button
Setup Button
Polarity Button Enter
Button
Balance
Button
IR
Receiver
Input
Knob
Loading ...
Loading ...
Loading ...