Loading ...
Loading ...
Loading ...
45
BEFORE REQUESTING SERVICE
ENGLISH
Symptoms and Questions Possible Cause/Solution
Too much smoke during the Self Clean cycle. Too much soil in the oven. Open the windows to get rid of the smoke from
the room. Press the
UPPER
or
LOWER STOP
button. Wait until the
m
light
goes off before trying to open the oven door. Wipe up the excess soil and
reset the clean cycle.
The oven door does not open after Self Clean cycle. The oven temperature is too high. Wait up to one hour to cool down.
The oven door is not clean after a Self Clean cycle.
y
Incorrect oven control settings. See the Self Clean section in the Care and
Cleaning section.
y
The oven was heavily soiled. Clean up heavy spills before beginning the
Self Clean cycle. Heavily soiled ovens may need either a longer Self
Clean or two Self Clean cycles.
“CLOSE DOOR TO CONTINUE BROILING” or “DOOR OPENED”
appears in the display.
Close the oven door.
"DOOR LOCKED" message appears when you want to cook. The oven door is locked because the temperature inside of the oven is too
high. Press the
UPPER
or
LOWER STOP
button.
Oven control beeps and displays an F error code.
y
Press the
UPPER
or
LOWER STOP
button and wait for one hour.
y
Check the main gas shut-off valve or the gas pressure shut-off valve and
call for service.
y
Remove the power from the range for five minutes and then reconnect the
power. If the function error code repeats, call for service.
The oven racks were cleaned in a Self Clean cycle. Apply a small amount of vegetable oil to a paper towel and wipe the edges
of the oven racks. Do not use lubricant sprays.
Clock is flashing. Power outage or surge. Reset the clock. If the oven was in use, you must reset
it by pressing the
UPPER
or
LOWER STOP
button. Reset the clock and any
cooking function.
“Burning” or “oily” odor emitting from the vent.
y
After checking the oven’s operation, turn the temperature up to 450 °F
and leave the oven on for at least an hour to help remove any oil which
might cause smoke and odors when first using the oven.
Strong odor. An odor from the insulation around the inside of the oven is normal for the
first few times the oven is used.
Fan noise (convection models) The convection fan may turn on and off automatically.
This is normal.
Convection fan not working (convection models). The preheating temperature has not been reached. The fan will start
automatically once the preheating temperature is reached.
Burners are not lighting properly after cleaning the cooktop
surface.
Make sure that the burner heads and caps are completely dry and properly
positioned.
When lighting just one burner, clicking noise is heard from all the
burners.
This is normal. Electric spark igniters from the burners cause the clicking
noise. All the spark igniters on the cooktop will activate when igniting just
one burner.
My range is still dirty after running the LO TEMP CLEAN cycle.
What else should I do?
The LO TEMP CLEAN cycle
only helps to loosen light soils
in your oven
range to assist in hand-cleaning of your oven. It
does not automatically
remove all soils after the cycle.
Some scrubbing of your oven range is
required after running the LO TEMP CLEAN cycle.
Loading ...
Loading ...
Loading ...