Loading ...
Loading ...
Loading ...
Yellow Warning Lights
— Active Speed Limiter Fault Indica-
tor Light — If Equipped
This warning light will illuminate to signal
when there is a fault detected with the Active
Speed Limiter.
— Adaptive Cruise Control (ACC) Fault
Warning Light — If Equipped
This warning light will illuminate to indicate
a fault in the ACC system. Contact a local
authorized dealer for service.
For further information, refer to “Adaptive
Cruise Control (ACC)” in “Starting And Oper-
ating.”
— Anti-Lock Brake (ABS) Warning
Light
This warning light monitors the Anti-Lock
Brake System (ABS). The light will turn on
when the ignition is placed in the ON/RUN or
ACC/ON/RUN position and may stay on for as
long as four seconds.
If the ABS light remains on or turns on while
driving, then the Anti-Lock portion of the
brake system is not functioning and service is
required as soon as possible. However, the
conventional brake system will continue to
operate normally, assuming the Brake Warn-
ing Light is not also on.
If the ABS light does not turn on when the
ignition is placed in the ON/RUN or ACC/ON/
RUN position, have the brake system in-
spected by an authorized dealer.
— Audio System Failure Light — If
Equipped
This light will illuminate to report a failure of
the Audio System. Contact an authorized
dealership as soon as possible.
— Electronic Park Brake Warning
Light
This warning light will illuminate to indicate
the Electronic Park Brake is not functioning
properly and service is required. Contact an
authorized dealer.
— Forward Collision Warning Off Indi-
cator Light — If Equipped
This indicator light illuminates to indicate
that Forward Collision Warning is off.
— Icy Road Condition Indicator Light
— If Equipped
This light will illuminate during an icy road
condition.
— Low Fuel Warning Light
When the fuel level reaches approximately
1.3–1.8 gal (5–7 L) this light will turn on,
and remain on until fuel is added.
— LaneSense Warning Light — If
Equipped
The LaneSense system provides the driver
with visual and steering torque warnings
when the vehicle starts to drift out of its lane
unintentionally without the use of a turn
signal.
• When the LaneSense system senses a lane
drift situation, the LaneSense indicator
changes from solid green to solid yellow.
GETTING TO KNOW YOUR INSTRUMENT PANEL
60
Loading ...
Loading ...
Loading ...