Loading ...
Loading ...
Loading ...
TRIP COMPUTER
The Trip computer is used to display informa-
tion on car operation when the key is turned
to the RUN position.
This function allows you to define two sepa-
rate trips called “Trip A” and “Trip B” where
the car's "complete trips" are monitored in an
independent manner.
Both trips can be reset (reset - start of a new
trip). To perform a reset, push and hold the
OK button on the steering wheel controls.
“Trip A” and “Trip B” are used to display the
figures relating to:
• Distance Travelled
• Average Consumption
• Travel Time (driving time)
Quantities Displayed
Distance Travelled
• Indicates the distance travelled by the start
of the new trip.
Average Consumption
• Represents the average fuel consumption
since the start of the new trip.
Travel Time
• Elapsed time since the start of the new trip.
OK Button
Short Push Of The Button: display of various
parameters.
Long Push Of The Button: reset quantities
and begin a new trip.
New trip
Starts after reset:
• "Manual" by pushing the OK button.
• "Automatic" when the "distance" reaches
the value of 62140 (99999.9 km) or when
the "time travel" reaches the value of
999.59 (999 hours and 59 minutes).
• After each disconnection and reconnection
of the battery.
WARNING/INDICATOR
LIGHTS AND MESSAGES
The warning/indicator light switches on in the
instrument panel together with a dedicated
message and/or acoustic signal when appli-
cable. These indications are indicative and
precautionary and as such must not be con-
sidered as exhaustive and/or alternative to
the information contained in the Owner
Manual, which you are advised to read care-
fully in all cases. Always refer to the informa-
tion in this chapter in the event of a failure
indication.
All active telltales will display first, if appli-
cable. The system check menu may appear
different based upon equipment options and
current vehicle status. Some telltales are
optional and may not appear.
The following warning lamps and indicators
will alert you to a vehicle condition that may
become serious. Some lamps will illuminate
when you start your vehicle to make sure they
work. If any lamps remain on after starting
your vehicle, refer to the respective system
warning lamp for further information.
GETTING TO KNOW YOUR INSTRUMENT PANEL
56
Loading ...
Loading ...
Loading ...