Loading ...
Loading ...
Loading ...
WARNING!
To avoid the risk of forcing the vehicle off
the jack, do not fully tighten the wheel
bolts until the vehicle has been lowered.
Failure to follow this warning may result in
serious injury.
3. Lower the vehicle to the ground by turning
the jack handle counterclockwise.
4. Finish tightening the wheel bolts. Push
down on the wrench while at the end of
the handle for increased leverage. Tighten
the wheel bolts in a star pattern until each
wheel bolt has been tightened twice. Re-
fer to “Torque Specifications” in the
“Technical Specifications” section for the
proper lug bolt torque. If in doubt about
the correct tightness, have them checked
with a torque wrench by an authorized
dealer or service station.
5. Lower the jack until it is free. Remove the
wheel chocks. Stow the jack and tools
back in the proper storage location. Re-
lease the Electric Park Brake before driv-
ing the vehicle.
6. After 25 miles (40 km) check the wheel
bolt torque with a torque wrench to ensure
that all wheel bolts are properly seated
against the wheel.
TIRE SERVICE KIT — IF
EQUIPPED
Tire Service Kit Storage
The Tire Service Kit is located in the rear
storage compartment inside a storage con-
tainer. Located inside the container are a
screwdriver and the emergency fuel funnel.
To access the Tire Service Kit open the lift-
gate and remove the load floor.
Tire Service Kit Components And
Operation
Tire Service Kit Components
1 — Power Plug (Located On Bottom
Side Of Tire Service Kit)
2 — Sealant Hose (Clear)
3 — Power Button
4 — Pressure Gauge
5 — Warning Label
177
Loading ...
Loading ...
Loading ...