Loading ...
Loading ...
Loading ...
30
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Clothes getting too
hot or damaged
Cycle selected not
appropriate for the load.
Ensure the cycle selected is
appropriatefor items in the load.
Referto ‘Drying cycles’.
Items removed from dryer
before the end of cycle cool
down had finished.
Removing items before cool down
maydamage clothing if it is not
spread out and exposed to air to
coolonce removed from the dryer.
Dryer is beeping
and displaying
acode on the
digital display
Dryer has a fault. Try turning the dryer off and waiting
30seconds before turning it back on.
Refer to ‘Fault codes’.
Small puddle
ofwater coming
from under
themachine
Water tank not correctly
inplace.
Ensure the water tank is correctly
in place.
Water tank may need
tobeemptied.
Refer to ‘Emptying the water
collection tank’.
Water tank may be damaged. Check the water tank for any signs
ofdamage.
Drain hose may not be
attached properly at the
machine end.
Ensure the drain hose is attached
properly. Refer to ‘Draining’ in the
installation section of this guide.
Drain hose could be damaged. Check the drain hose for damage.
Drain hose has slipped
outofthe drain.
Ensure the drain hose is securely fixed
in place. Sometimes drain hoses can
move or get displaced, which may
lead to water draining onto the floor.
Drain may be blocked. Check the drain for any blockages.
Dryer door not closing
properly, affecting the seal.
Ensure the dryer door is closed
properly and there is nothing
obstructing the door opening.
Small amount
ofwater in
thedrum at
endofcycle
Water tank needs to be
emptied.
Refer to ‘Emptying the water
collection tank’.
Environmental conditions may
be affecting dryer operation.
If conditions are particularly hot,
humidor cold, it is possible vaporised
water may re-condense in the drum or
on the inside of the door.
Loading ...
Loading ...
Loading ...