DH9060C1 User Manual

Loading ...

Emptying the water collection tank

During the drying cycle, steam condenses into water

andis collected in the water tank, located at the top

left of the dryer. It is important to empty the water

tank after every load.

Ifthewater tank becomes full during operation,

thedryer will pause, display a user prompt and beep

to alert you. You must emptythe tank before the

dryer can continue drying. Empty the tank, replace it

in the housing then touch

to resume the cycle.

Note: You do not need to empty the water tank

ifyou have set up the drain hose to drain the

waterautomatically.

To empty the water tank:

1 Remove the water tank by holding onto the

handleand pulling outwards gently to remove it.

Ensurethat you keep the tank level when it is being

removed to prevent the water collected from spilling.

2 Pour the water down the sink or into a bucket,

andthen put the tank back in place.

IMPORTANT!



Do not use the water collected in the water tank for

drinking or food processing.



Never run the dryer without the water tank in place unless

thedrainhosehasbeeninstalled.

Cleaning the sensors

There are sensors in your dryer that detect whether the laundry is dry or not.

Thesesensors need to be cleaned periodically (we recommend approximately

fourtimes a year).

To clean the sensors:

1 Open the door of your machine.

2 Allow the machine to cool if drying hasbeen

carried out.

3 Locate the metal sensors just behind thelint filter.

4 Wipe the sensors with a soft cloth, dampened

withvinegar.

Dry the sensors with a soft dry cloth.

CARING FOR YOUR DRYER

Location of the sensors

Removing the

water collection tank

Tipping out the water

from the condensing tank

Loading ...

User Manual - Page 27