Loading ...
Loading ...
Loading ...
21
Drying Cycle Options
All drying cycles default to the recommended options based on the average expected
load to be dried. You can vary the options (eg‘Dryness Level’, ‘Wrinkle Free’) to create
your desired cycle.
Note: Some options are not available on some cycles for clothes care reasons, or
because the option is not appropriate for the cycle.
To change a drying cycle option:
1 Touch on the control panel.
2 Touch or to scroll the options.
3 Touch to select the option and enable editing.
4 Touch or to select the option and then touch to confirm.
To change an option or options you have selected after a cycle has started:
Turn the dryer off and on again using the POWER button, then select your new setting
through the options menu, touch to restart the cycle with the new setting or settings.
Note: Some options may not be available for selection under certain conditions and
after particular stages of the drying cycle have passed.
DESCRIPTION OPTIONS
Dryness Level
When your dryer senses that the clothes have
dried
to the dryness level selected, the dryer
will
automatically finish the cycle.
Note: Two lights are used to show some dryness
levels, eg to achieve the ‘Damp Dry’ setting
both
the ‘Dry’ and the ‘Damp’ dry lights will
be
illuminated.
Five dryness levels from
‘Damp’
through to ‘Extra Dry’.
If
you wish to change from
the
default dryness, you can
choose the dryness level to
suit
your load depending on
how dry you wish for your
itemsto be.
Damp Dry
Signal
ON
Options
Wrinkle Free
To minimise wrinkling, select one of the ‘WrinkleFree’
options. At the end of the cycle, the drum will
rotate
periodically and cool air will be circulated
through the load to minimise wrinkling and creasing.
This is particularly useful if you cannot remove the
items immediately after the cycle ends.
‘ON’ provides ‘Wrinkle Free’
operation for 1 hour.
‘Extra’ provides ‘Wrinkle Free’
operation for 24 hours.
No Delay
Everyday
Auto
Damp Dry Signal
Use this option if you want your dryer to alert you to
remove items once your load reaches the damp stage.
The dryer will beep to alert you to remove your items,
then it will continue drying until the remaining load
reaches the dryness level you selected.
Note: If ‘Beeps’ have been set to OFF in the ‘Settings’
menu — this option will not be available.
ON
OFF
Damp Dry
Signal
O
Option
CUSTOMISING DRYING CYCLE
Loading ...
Loading ...
Loading ...