Loading ...
Loading ...
Loading ...
EN-23
•
If the cable is damaged or to be replaced, the operation must be carried
out the by after-sale agent with dedicated tools to avoid any accidents.
•
If the appliance is being connected directly to the mains an omnipolar
circuit-breaker must be installed with a minimum opening of 3mm between
contacts.
•
The installer must ensure that the correct electrical connection has been
made and that it is compliant with safety regulations.
•
The cable must not be bent or compressed.
•
The cable must be checked regularly and replaced by authorised
technicians only.
•
The yellow/green wire of the power supply cable must be connected to
the earth of both power supply and appliance terminals.
•
The manufacturer cannot be held responsible for any accidents resulting
from the use of an appliance which is not connected to earth, or with faulty
earth connection continuity.
•
If the appliance has a socket outlet, it must be installed so that the
socket outlet is accessible.
Selection of cooking vessels
Iron oil frying
Stainless steel
Iron pan
Iron kettle
Enamel
stainless steel
kettle
Enamel cooking
utesil
Iron plate
You may have a number of different cooking vessels
1.
This induction hob can identify a variety of cooking vessels, which you can test by
one of the following methods:
Place the vessel on the cooking zone. If the corresponding cooking zone displays a
p
o
w
er
level
,
t
h
en
t
h
e
ves
s
el
i
s
su
i
t
a
b
l
e.
I
f
“
U
”
f
la
sh
e
s
,
t
h
e
n
t
h
e
ves
s
el
is
n
o
t
suitable for use with the induction hob.
2.
Hold a magnet to the vessel. If the magnet is attracted to the vessel is suitable for
use with the induction hob.
NB: The base of the vessel must contain magnetic material.
It must have flat bottom with a diameter according to the table 1 below.
Loading ...
Loading ...
Loading ...