Loading ...
Loading ...
Loading ...
Servicing Your Honda 49
Coolant
4. Add coolant to the reserve tank as require to
bring the coolant level to the UPPER level
mark.
5. Install the reserve tank cap (10).
6. Install the left side cover (9), seat mounting
bolt (8), collar (7) and left side cover bolt (6).
Close the air cleaner housing cover (4) and turn
the quick fastener (5) clockwise.
Tighten the seat mounting bolt to the specified
torque:
19 lbf·ft (26 N·m, 2.7 kgf·m)
1. Check the cooling system for leaks (see the
Honda Service Manual for troubleshooting of
leaks).
2. Check the water hoses (1) for cracks,
deterioration, and radiator hose clamp for
looseness.
3. Check the radiator mount for looseness.
4. Make sure the siphon hose (2) is connected and
not clogged.
5. Check the radiator fins for clogging.
6. Check the bleed hole (3) below the water pump
cover (4) for leakage. Check for signs of seal
leakage. A small amount of “weeping” from
the bleed hole is normal. See the Honda Shop
Manual or consult your dealer for replacing the
mechanical seal or oil seal. Both seals should
be replaced at the same time.
(4) air cleaner housing cover
(5) quick fastener
(6) left side cover bolt
(7) collar
(8) seat mounting bolt
(9) left side cover
(10) reserve tank cap
(4)
(5)
(6)
(10)
(9)
(8)
(7)
Cooling System Inspection
(1) water hose
(2) siphon hose
(3) bleed hole
(4) water pump cover
(2)
(1)
(3)(4)
Loading ...
Loading ...
Loading ...