Loading ...
Loading ...
Loading ...
4
Save these instructions for future reference.
Important Safety Instructions
Read all instructions before using this appliance.
IMPORTANT INSTRUCTIONS FOR
UNPACKING AND INSTALLATION
IMPORTANT - Read and follow the below
instructions and precautions for unpacking,
installing, and servicing your appliance:
Remove all tape and packaging before using
the appliance. Destroy the carton and plastic
bags after unpacking the appliance. Never
allow children to play with packaging
material. Do not remove the wiring label and
other literature attached to the appliance. Do
not remove model/serial number plate.
Cold temperatures can damage the elec-
tronic control. When using this appliance for
the first time, or when the appliance has not
been used for an extended period of time, be
sure the appliance has been in temperatures
above 32ºF (0ºC) for at least 3 hours before
turning on the power to the appliance.
Never modify or alter the construction of the
appliance by removing the leveling legs,
panels, wire covers, anti-tip brackets/screws,
or any other part of the appliance.
Be sure to have an appropriate foam-type fire
extinguisher available, visible, and easily
accessible located near the appliance.
Air curtain or other overhead range hoods
which operate that operate by blowing a
downward air flow onto a range or cooktop,
shall not be used in conjunction with gas
ranges or cooktops other than when the
range or cooktop and hood have been
designed, tested, and listed by an indepen
-
dent test laboratory for use in combination
with each other.
GROUNDING INSTRUCTIONS
Avoid fire hazard or electrical shock. Failure
to follow this warning may cause serious
injury, fire, or death.
Avoid fire hazard or electrical shock. Do not
use an adapter plug, use an extension cord,
or remove grounding prong from the power
cord. Failure to follow this warning may cause
serious injury, fire, or death.
Proper Installation—Be sure your appliance
is properly installed and grounded by a
qualified technician. In the United States,
install in accordance with the National Fuel
Gas Code ANSI Z223.1/NPFA No. 54, latest
edition and National Electrical Code NFPA
No. 70 latest edition, and local electrical code
requirements. In Canada, install in accor
-
dance with CAN/CGA B149.1 and CAN/CGA
B149.2 and CSA Standard C22.1, Canadian
Electrical code, Part 1-latest editions and
local electrical code requirements. Install only
per installation instructions provided in the
literature package for this appliance.
For personal safety, this appliance must be
properly grounded. For maximum safety, the
power cord must be securely connected to
an electrical outlet or junction box that is the
correct voltage, is correctly polarized and
properly grounded, and protected by a circuit
breaker in accordance with local codes.
It is the personal responsibility of the
consumer to have the appropriate outlet or
junction box with the correct, properly
grounded wall receptacle installed by a
qualified electrician. It is the responsibility
and obligation of the consumer to contact a
qualified installer to assure that the electrical
installation is adequate and is in confor
-
mance with all local codes and ordinances.
This appliance is equipped with a 4-prong
grounding plug for your protection against
shock hazard and should be plugged directly
into a properly grounded receptacle. Do not
cut or remove the grounding prong from this
plug.
Loading ...
Loading ...
Loading ...