Loading ...
Loading ...
Loading ...
14 Before Setting Oven Controls
BEFORE SETTING OVEN CONTROLS
Oven Vent Location
The oven vent is located in the front of the oven just below the
burner controls. When the oven is in use, warm air passes
through this vent for proper air circulation and provides good
baking results. Steam or moisture may appear near the oven
vent. This is normal. Do not block this vent.
IMPORTANT! Some models are equipped with a cooling fan
that runs during the cooking process to cool internal electronic
components. It is normal for this fan to continue to run for an
extended period of time, even when the oven is off.
Protective liners — Do not line the oven walls, racks, bottom or
any other parts of the range with aluminum foil. Doing so will alter
heat distribution, produce poor baking results, and may cause
permanent damage to the oven interior. During self clean
temperatures the oven will be hot enough to melt foil.
• Use aluminum foil only as recommended in this manual.
Improper installation or use of these liners may result in risk
of electric shock or fire.
• Always use potholders or oven mitts when removing food or
adjusting the oven racks. Wait until the oven has
completely cooled if possible. Oven racks may be very hot
and may cause burns.
• Remove all oven racks and rack ladders before starting a
self clean cycle. If oven racks are left inside the oven during
a cleaning cycle, the slide ability of the Luxury-Glide™ oven
racks may be damaged and all of the oven racks will lose
their shiny finish. Clean oven racks according to the instruc
-
tions provided in the “Care and Cleaning” section.
Oven Racks
Your appliance comes with the following rack types (See
Figure 12 for the following descriptions):
• Flat handle oven racks are used for most cooking needs
and can be placed in most oven rack positions.
• The fully extendable Luxury-Glide™ oven rack allows the
user to effortlessly extend food away from the oven. It has
glide tracks that allow the rack to be pulled away from the
oven without rubbing the sides of the oven wall.
• For ease of removal, racks should not be placed in
adjacent rack positions.
Figure 11: Oven vent location
oven vent
Figure 12: Rack types
Loading ...
Loading ...
Loading ...