Loading ...
Loading ...
Loading ...
Servicing Your Honda 73
Valve Clearance
1. Check the spark plug hole packing (1) is in
good condition, replace it if necessary.
Apply engine oil to the spark plug hole packing
and install it to the spark plug hole (2).
2. Inspect the cylinder head cover packing (3)ޓ
for damage or deterioration, replace it ifޓ
necessary.
Install the cylinder head cover packing intoޓ
the groove of the cylinder head cover (4).
3. Check the rubber seals (5) are in good
condition, replace them if necessary.
Install the rubber seals onto the cylinder head
cover with the “UP” marks (6) facing up.
4. Install the cylinder head cover (4) and tighten
the cylinder head cover bolts (7) to the
specified torque:
7 lbf·ft (10 N·m, 1.0 kgf·m)
5. Install the spark plug (page 61).
6. Connect the direct ignition coil (8) and
breather tube (9).
7. Install the fuel tank and seat (pages 36, 38).
Cylinder Head Cover Installation
(1) spark plug hole packing
(2) spark plug hole
(3) cylinder head cover packing
() cylinder head cover
(2)
(1)
(3)
(4)
(5) rubber seal
(6) “UP” marks
(4) cylinder head cover
(7) cylinder head cover bolts
(5)
(6)
(6)
(7)
(4)
(8) direct ignition coil
(9) breather tube
(8)
(9)
Loading ...
Loading ...
Loading ...