Loading ...
Loading ...
Loading ...
130 Adjustments for Competition
Carburetor Adjustment & Tuning Tips
1. Turn the fuel valve OFF.
2. Drain the remaining fuel in the float bowl into
an approved gasoline container by loosening
the carburetor drain screw (1).
Drain the carburetor into an approved gasoline
container and dispose of it in an approved manner
(page 143).
NOTICE
Improper disposal of drained fluids is harmful to
the environment.
3. Tighten the carburetor drain screw after drain
the fuel.
4. Remove the fuel tank (page 37).
5. Remove the band (2) and rear suspension
upper mounting nut (3), and pull out the rear
suspension upper mounting bolt (4).
6. Lift the subframe to the upright position
(page 39).
7. Loosen the intake band screw (5) and remove
the clip (6).
8. Disconnect the throttle position sensor
connector (7). Remove the carburetor.
9. Remove the hot start cable holder (8).
Carburetor Removal
WARNING
Gasoline is highly flammable and
explosive. You can be burned or seriously
injured when handling fuel.
• Stop the engine and keep heat, sparks
and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
(1) carburetor drain screw
(1)
(2) band
(3) rear suspension upper mounting nut
(4) rear suspension upper mounting bolt
(5) intake band screw
(6) clip
(2)
(3)
(4)
(5)
(6)
(7) throttle position sensor connector
(8) hot start cable holder
(7)
(8)
Loading ...
Loading ...
Loading ...