Loading ...
Loading ...
Loading ...
Headlight & Taillight
Servicing Your Honda 101
Headlight & Taillight
Refer to Safety Precautions on page 25.
1. Remove the front visor bolts (1) and pull out
the front visor (2).
2. Disconnect the headlight connector (3).
Remove the dust cover (4).
3. To pull the headlight bulb out, push and turn
the headlight bulb socket (5)
counterclockwise.
4. To install a new headlight bulb, push and turn
the headlight bulb socket clockwise.
If you touch the bulb with your bare hands, clean it
with a cloth moistened with denatured alcohol to
prevent early bulb failure.
5. Install the dust cover (4) tightly against the
headlight unit with its “TOP” mark (6) facing
up.
6. To install the headlight, reverse the removal
procedure.
The headlight aim can be raised or lowered.
Turn the adjusting screw (1) clockwise to move the
headlight up or turn the adjusting screw
counterclockwise to move the headlight down to
proper adjustment.
The taillight uses LED illumination.
If the taillight does not function properly, see your
dealer for service.
This model is equipped with an electric starter and
battery for easy engine starting.
There is a possibility of damage to the lighting
system if the battery is carelessly removed.
Never kick-start the engine without the battery
connected.
If it becomes necessary to kick-start the engine
with the battery removed, remove the relays to the
battery to prevent damage to the lighting.
Headlight Bulb
(1) front visor bolts
(2) front visor
(3) headlight connector
(4) dust cover
(2)
(1)
(3)
(4)
(5) headlight bulb socket
(4) dust cover (6) “TOP” mark
(5)
(4)
(6)
Headlight Aim
(1) adjusting screw
Taillight
(1)
Loading ...
Loading ...
Loading ...