Loading ...
Loading ...
Loading ...
108 Adjustments for Competition
Front Suspension Adjustments
1. Place your CRF on the optional workstand or
equivalent support with the front wheel off the
ground.
2. Remove the front visor bolts (3) and front visor
(4).
3. Disconnect the headlight connector (5).
4. Remove the handlebar pad.
Remove the handlebar holder nuts, washers,
mounting rubbers (6) and handlebar (7).
NOTICE
Keep the master cylinder upright to prevent air
from entering system.
5. Loosen the upper pinch bolts (8).
6. Loosen the fork dampers (9) using the lock nut
wrench but do not remove it yet.
• Lock nut wrench 07WMA-KZ30100
NOTICE
Do not use an adjustable wrench to loosen the fork
damper: it may damage them.
7. Remove the disc cover (10) by removing the
bolts (11).
8. Remove the tripmeter cable (12) and front axle
nut (13) and loosen the axle pinch bolts (14) on
both fork legs.
9. Pull the front axle shaft (15) out of the wheel
hub and remove the front wheel.
10. Remove the fork protector bolts (16), tripmeter
cable clamp bolts (17) and brake hose clamp
bolts (18) and fork protectors (19).
Remove the brake caliper bolts (20) and brake
caliper (21).
The fork protector bolts and brake caliper bolts
have a locking agent applied.
(3) front visor bolts
(4) front visor
(5) headlight connector
(3)
(4)
(5)
(6) handlebar holder nuts/washers/mounting rubbers
(7) handlebar
(8) upper pinch bolts
(9) fork damper
(7)
(6)
(8)
(9)
(10) disc cover
(11) bolts
(12) tripmeter cable (14) axle pinch bolts
(13) front axle nut (15) front axle shaft
(10)
(11)
(14)
(15)
(12)
(14)
(13)
Loading ...
Loading ...
Loading ...