Gaggenau BSP250610 200 Series 24" Metallic Electric Single Wall Steam Oven

User Manual - Page 34

For BSP250610. Series: 200
Also, The document are for others Gaggenau models: BSP251610

PDF File Manual, 52 pages, Read Online | Download pdf file

BSP250610 photo
Loading ...
Loading ...
Loading ...
34
7 Empty the evaporator tray with the cleaning sponge.
Fill the water tank with cold water. Confirm with .
8 The first rinsing operation appears. Start with I.
The appliance rinses. The rinsing time elapses on
the display.
9 A signal sounds after 1minute. Empty the
evaporator tray with the cleaning sponge. Confirm
with .
10 The second rinsing operation appears. Start with I.
The appliance rinses. The rinsing time elapses on
the display.
A signal sounds after 1minute. The descaling program
has ended.
Empty the evaporator tray with the cleaning sponge.
Empty the water tank and allow it to dry with the cover
open. Wipe the oven interior dry with a soft cloth and
dry it completely with the drying program.
Then clear the descaling reminder from the display.
Clearing the descaling reminder
1 Set the function selector to S. Select “¥ Delete
descaling reminder” with the rotary selector.
Confirm with .
2 A message appears. Confirm with .
Notes
The descaling programme must always run
completely and can not be cancelled.
Before cooking, remove any descaler residue from
the cooking compartment.
If the descaling programme was cancelled due to a
power cut, it must be restarted before using the
oven again in order to remove any descaler
residues from the appliance.
Removing slide-in racks
You can remove the slide-in racks for cleaning.
Removing slide-in racks
1 Place a dishcloth in the oven interior to protect the
stainless steel against scratches.
2 Undo the knurled nuts (Figure A).
3 Pull away the slide-in racks slightly sideward from
the screw and pull it out toward you (Figure B).
You can clean the slide-in racks in a dishwasher.
Hooking in slide-in racks
1 Fit slide-in racks the right way round: they bottom at
the back.
2 Push the slide-in racks onto the bolt at the rear and
then hook them in at the front.
3 Tighten the knurled nuts.
Note: If you should lose a knurled nut, you can reorder
it as a spare part from our after-sales service. Using
knurled nuts other than the original ones will cause
corrosion in the oven interior.
5LQVLQJSURFHVV

_
$
%
Loading ...
Loading ...
Loading ...