Loading ...
Loading ...
Loading ...
18
Inserting accessories
The rack and the perforated cooking receptacle feature
a latching function. The latching function prevents tilting
of accessories when pulling them out. You must insert
accessories in the cooking interior correctly so that tilt
protection will work. When removing accessories, you
must raise them slightly.
When inserting the rack, make sure
▯ that the engaging lug (a) points upward
▯ that the rack's safety clip is at the rear and top.
When pushing in the perforated cooking receptacle,
make sure that the recess (a) points to the side.
Turning on
1 Set the required heating function with the program
selection. The chosen heating function and the
default temperature are displayed.
2 If you would like to change the temperature:
set the required temperature with the rotary
selector.
The preheating symbol “ appears on the display. The
bar continuously shows the preheating status. When the
set temperature is reached, a signal sounds and the
preheating symbol “ goes off.
Note: The oven interior lighting stays switched off at a
temperature setting below 160° F (70°C).
Topping up water:
a message appears in the display when the water tank is
empty. Fill the water tank up to the "max" mark and insert
it again.
Switching off:
Set program selection to 0.
After every use
Empty water tank
1 Open the appliance door carefully.
Hot steam can escape!
2 Remove and empty water tank.
3 Dry the tank lid and tank duct in the appliance well.
9 CAUTION
Do not dry the water tank in the hot oven. This will
damage the water tank.
Drying the oven interior
9 WARNING
Risk of scalding
The water in the evaporator tray may be hot. Let it
cool down before emptying it.
1 Remove soiling from the oven interior as soon as it
has cooled down. Baked-in residue is much harder
to remove later on.
2 Empty the evaporator tray with the included
cleaning sponge.
3 Wipe out the cooled down oven interior and the
evaporator tray with the cleaning sponge and dry
them well with a soft cloth.
4 Wipe furnishings or handles dry if condensate has
collected on them.
5 Dry the oven interior with the drying program (see
section entitled Drying program) or leave the
appliance door open until the interior has dried
completely.
Safety shut-off
For your protection, the appliance has a safety shut-off
feature. Every heating operation is switched off after
12hours if the appliance is not operated during this
time. A message appears in the display.
Exception:
programming with the long-term timer.
Turn the program selection to 0, after which you can
operate the appliance in the manner to which you are
accustomed.
D
D
D
D
Loading ...
Loading ...
Loading ...