Loading ...
Loading ...
Loading ...
33
10 The second rinsing operation appears. Start with I.
The appliance rinses. The rinsing time elapses on
the display.
A signal sounds after 1minute. Empty the evaporator
tray with the cleaning sponge. Empty the water tank and
allow it to dry with the cover open. Wipe the oven
interior dry with a soft cloth and dry it completely with
the drying program.
Notes
‒ Always allow the cleaning aid to run fully. It cannot
be prematurely.
‒ Remove cleaning agent residue thoroughly from the
oven interior before cooking.
‒ If the cleaning aid has been canceled due to a
power outage, you must restart the cleaning aid
before the next use to remove cleaning agent
residue from the oven interior.
Drying program
With the drying program, you can dry the oven interior
after cleaning or after steaming.
The drying program takes 20minutes.
9 CAUTION
Do not dry the water tank in the hot oven interior.
This would damage the water tank.
Starting the drying program
1 Remove the water tank. Remove accessories from
the oven interior. Empty the evaporator tray with the
cleaning sponge. Wipe out the oven interior.
Thoroughly remove residues of cleaner. Close the
appliance door.
2 Set the function selector to S. Select the drying
program with the rotary selector.
3 The j symbol is displayed. Confirm with ™.
4 The drying time of 20minutes appears. Start with I.
The drying time elapses on the display. The lamp in
the oven interior stays off.
5 A signal sounds after 20minutes. A message
appears in the display. Confirm with ™.
The drying program has ended. Allow the appliance to
cool down. Then polish the oven interior and the pane
with a soft cloth.
Descaling program
Your appliance must be descaled at regular intervals for
it to remain operable. A reminder appears in the display.
The descaling program consists of the steps of
descaling and twice rinsing.
Descaler
For descaling, use only the liquid descaler
recommended by after-sales service (order No.
311138from after-sales service or in the online shop).
Other descaling agents can cause damage to the
appliance.
9 CAUTION
Surface damage
Wipe off descaler immediately with water if it
reaches the door seal, the front or other sensitive
surfaces.
Starting the descaling program
The oven interior must have cooled down completely.
1 Mix 300 ml (about 0.6pints) of water and 60 ml
(about 0.13pints) of liquid descaler to form a
descaling solution.
2 Set the function selector to S. Select the descaling
program with the rotary selector.
3 The ‘ symbol is displayed. Confirm with ™.
4 Fill the water tank with the descaling solution and
slide it into the tank slot. Close the appliance door.
Confirm with ™.
5 The descaling time of 30minutes appears. Start
with I. The descaling time elapses on the display.
The lamp in the oven interior stays off.
6 A signal sounds after 30minutes. A message
appears in the display.
'U\LQJSURJUDP
_
'HVFDOLQJ
_
Loading ...
Loading ...
Loading ...