Loading ...
Loading ...
Loading ...
8
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
Control panel
# ITEM DESCRIPTION
1
Power Press to turn your dryer on.
If your dryer is on for more than 10 minutes without any
buttons being pressed, it automatically goes into stand-by.
2
Wrinkle
Prevent
Press once to add the wrinkle prevent step into the operating
program. Press again to cancel selection.
When active, Wrinkle Prevent provides about 90 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. The load is already dry, and can be removed
at any time during the wrinkle care cycle.
3
Delay Press to delay your clothes drying time within 24 hours. The
program starts after the number of hours you have set.
When the delay program starts, the time counts down on the
display and the delay icon blinks.
4
Time Adjust Press repeatedly to change your cycle’s drying time to 120
minutes, 90 minutes, 60 minutes, or 30 minutes. For manual
cycles only.
5
Dryness Press to select the dryness level, including More, Normal, Less,
or Damp. Different dry levels have different drying time. For
clothes to be ironed manually, select a lower dry level.
Press and hold for three seconds to save your favorite drying
cycle. This cycle will be “My Cycle.”
6
Signal Press once to turn off the buzzer sound. Press again to turn on
the sound. Your selection is saved until the button is pressed
again.
7
Child lock Press and hold (signal) and Damp Alert together for three
seconds to turn the child lock function on or off. The child lock
indicator lights. All buttons except Power are locked when the
child lock is activated.
Loading ...
Loading ...
Loading ...