Loading ...
Loading ...
Loading ...
46
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
Dryer shuts
off before the
clothes are
dried.
• The dryer load is too small. Add more items or a few towels and
restart the cycle.
• The dryer load is too large. Remove some items and restart the
cycle.
• Consider using a Time dry cycle.
Clothing is
still wrinkled
after using
the Wrinkle
Prevent
setting.
• Small loads of one to four items work best.
• If the dryer load is too large, items cannot tumble freely. Try
loading fewer items.
• Make sure that the items in the dryer load are similar. The Wrinkle
Prevent setting works best when the items in the dryer load are
similar-type items.
There is lint
on the
clothing.
• Check pockets thoroughly before washing and drying clothes.
Things like paper or tissue can break up into small pieces that turn
into lint.
• Clean the lint filter before every cycle. Some loads that produce
high amounts of lint can clog the filter.
• Some fabrics are lint producers (like a fuzzy white cotton towel)
and they should be dried separately from clothes that are lint
trappers (like a pair of black linen pants).
• Divide larger loads into smaller loads for drying.
The
indicator is
lighting
• Clean the lint filter.
• When you turn on the power and before you start your dryer, the
lint filter indicator automatically flashes for10 seconds to remind
you to check the filter.
The
indicator is
lighting
• When the cycle is finished, flashes and the dryer beeps for five
seconds. Check the water reservoir:
• If it is full, pour out the condensate water and restart the dryer.
• If the reservoir is not full, you can restart the dryer.
• If the water full indicator is still on, contact Customer Service.
Clothing is
not dry
enough or the
drying time is
too long
• Clean the lint filters.
•Empty the water reservoir.
• Make sure that the drain hose (if connected) is draining properly.
• Make sure that your dryer has enough ventilation.
• Clean the moisture sensors.
• Make sure that the air inlet is clear and clean.
• Select a higher drying intensity or time cycle.
PROBLEM SOLUTION
Loading ...
Loading ...
Loading ...