Loading ...
Loading ...
Loading ...
30
www.insigniaproducts.com
INSTALLATION INSTRUCTIONS
7 Attach the connecting bracket rubber pads to the inside face of the two
connecting brackets.
8 Using the two connecting brackets as guides, use a 3 mm drill bit to drill holes
into the washer to connect the brackets (two holes per bracket). Use the left
bracket on the left side and the right bracket on the right side.
Note: There are no pilot screw holes in the washer. You must drill directly into
the washer cover. Make sure that you use a 3 mm drill bit.
Note: The connecting brackets are labeled L (left) and R (right).
Bracket holes
Loading ...
Loading ...
Loading ...