Loading ...
Loading ...
Loading ...
NVR User Manual
www.foscam.com
30
Step6 Select the Sensitivity from the drop-down box list. And then you can enable the detection
area.
You can drag the time bar to select the detection interval and record time.
Step7
Click Save button to take effect.
When the motion has been detected during the detection time in the detection area, the NVR will
alarm and adopt the corresponding alarm linkage.
Note: You must set the detection area and detection schedule, or else there is no alarm anywhere
and anytime.
-------End
[Other Alarm]
Choose Menu > Settings > Alarm > Other Alarm in the Menu interface. The Other Alarm interface
is displayed.
Click Save button to take effect.
Parameter
Description
Sensitivity
The higher the sensitivity, the NVR will be more easily alarmed.
Detection Interval
The Triggered Interval time between two motion detection. The unit is
second.
Record
(Time Second)
When you check the Record, you need to configure motion detection
recording time. The unit is second.
Loading ...
Loading ...
Loading ...