Loading ...
Loading ...
Loading ...
Water Maze Compact CoAg • 9.801-506.0-D
19
WATER TREATMENT SYSTEM
DEALER MANUAL
CONFIGURING AND TUNING PERISTALTIC PUMPS
Figure 1. Peristaltic pump dial.
This fi gure is a reference for
the pump settings determined
from the above chart . The dial
in the image is currently at the
“Lowest” setting.
Table 1. PPM concentration per
drop of chemical. To be used
with 20drops/ml transfer pipets
and 500 ml of sample water.
# of
Drops
PPM of
Chemical
1 100
2 200
3 300
4 400
5 500
6 600
7 700
8 800
9 900
10 1000
2
8
4
6
Lowest
Max
Calibrating Peristaltic Pumps:
1. Collect the ppm concentration values for the Coag
and EC polymer injections. Use the chart on the
last page to determine the correct setting for each
peristaltic pump. Align the ppm requirements with
the desired processing rate, in gallons per minute
(GPM), and obtain an estimate for the pump set-
ting from the continuum along bottom of the fi gure.
2. The pump settings reference the spaces between
hash marks on the pump’s fl ow rate adjustment
dial. Figure 1 on the last page shows the notation
for these markings. A small screw driver can be
used to adjust the pump to match the setting that
was estimated by the confi guration chart.
Number of Drops Observation
Pump Confi guration Chart for WaterMaze Coag/EC Water Treatment System.
Lowest
Max
4
6
8
2
Loading ...
Loading ...
Loading ...