Loading ...
Loading ...
Loading ...
72 English
Troubleshooting
Troubleshooting
Displayed
code
Possible cause Solution
Bad line This error message appears
if the power cord is installed
improperly.
If the power connection is
plugged in improperly, that
code appears on the display.
Reconnect the power
connection properly, and the
message disappears.
C-A2 This code occurs if the sub PCB
temperature rises abnormanlly
high.
Press OFF.
Check the oven vent and
cooling vent. If the vent is
closed, never block the vent
by anything. After cooling the
oven, restart the oven.
If this does not solve the
problem, call for service.
COOKTOP
Displayed code Possible cause Solution
This code occurs if communication
between the Main and Inverter PBA
is interrupted.
Turn the knob to Off,
and then turn it to the
setting you want again.
If the problem persists,
disconnect all power to
the range for at least
30 seconds and then
reconnect the power.
If this does not solve
the problem, call for
service.
The top sensor is open when the
burner is operating.
Call for service
The top sensor is short when the
burner is operating.
The IGBT sensor is open when the
burner is operating.
The IGBT sensor is short when the
burner is operating.
This code occurs if the DC fan motor
is open or locked.
Displayed if the cookware on an
element is unsuitable or too small
or no cookware has been placed on
the cooking zone.
Check the cookware
Loading ...
Loading ...
Loading ...