Loading ...
Loading ...
Loading ...
Problem solving guide
107
Problem Possible cause and remedy
The sensors do not
respond.
You have selected the Display| QuickTouch| Off setting.
When the oven is switched off, the sensors do not
respond.
As soon as the oven is switched on, the sensors
will respond. If you want the sensors to respond
even when the oven is switched off, select the
Display| QuickTouch| On setting.
The oven is not connected to the power supply.
Make sure that the plug is correctly inserted in the
socket and that the socket switch has been
switched to on.
Check if the circuit breaker has tripped. Contact a
qualified electrician or Miele.
There is a fault with the control unit.
Touch and hold the On/Off sensor until the
display switches off and the oven restarts.
Power cut -process
cancelled appears in the
display.
There has been a brief power cut. This has caused
the current cooking programme to stop.
Switch the oven off and then back on again.
Restart the cooking programme.
12:00 appears in the
display.
The power supply was interrupted for longer than 150
hours.
Reset the time and date.
Maximum operating hours
reached appears in the
display.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
Confirm with OK.
The oven is now ready to use.
Fault F32 appears in
the display.
The door lock for pyrolytic cleaning has not locked.
Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
If the message appears again, contact Miele.
Fault F33 appears in
the display.
The door lock for pyrolytic cleaning does not open.
Switch the oven off and then back on again.
If the door lock still does not unlock itself, contact
Miele.
Loading ...
Loading ...
Loading ...